Jabra SUPREME - Manual (Page 15)

14
english
Jabra SUPrEME
* Phone dependent
tRoUBLesHootInG & FAQ
I hear crackling noises
- bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device . It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc .) .
I cannot hear anything in my headset
- Increase the volume in the headset .
- Ensure that the headset is paired to a device that is playing .
- Make sure your phone is connected to the headset by tapping
the Answer/End button .
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone/device . Follow the pairing instruction to pair it
again .
I want to reset the pairing list in my headset
- The headset registers a list of up to 7 mobile phones . To
clear the pairing list and reset the Jabra SUPrEME to factory
settings you can turn the SUPrEME on while pressing the
VOL+ and Answer/end button for about 6 seconds . The next
time you power on the Jabra SUPrEME it will automatically go
into pairing mode .
Will the Jabra SUPREME work with other Bluetooth
equipment?
- The Jabra SUPrEME is designed to work with bluetooth mobile
phones . It can also work with other bluetooth devices that are
compliant with bluetooth version 1 .1 or higher and support a
headset, hands-free and/or advance audio distribution profile .
I cannot use Reject call, call on hold, Redial or voice dialing
- These features are dependent on the ability of your phone to
support a hands-free profile . Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices . Please consult
your device manual for details .