Jabra SUPREME - Manual (Page 5)

4
english
Jabra SUPrEME
GettInG stARted
Please follow these steps before using the Jabra SUPrEME:
1 Charge the Jabra SUPrEME using the supplied aC charger and
USb cable .
2 activate bluetooth® on your phone or device (refer to the
manual of your device)
3 Turn your Jabra SUPrEME on by flipping open the boom, and
pair it with your mobile device by following the voice guidance .
NOTE: Voice Guidance and Voice commands are enabled as the
default setting when you turn on your Jabra SUPrEME the first
time . You can at any time disable both by pressing the Voice
button while you flip the boom arm to On position . You will
hear a tone and SUPrEME will no longer talk to you or listen for
commands . repeat the process to enable the voice features again .
CHARGe YoUR JABRA sUPReMe
Make sure that your headset is fully charged before you start
using it . Use the USb cable to connect Jabra SUPrEME to a
USb port or use an aC charger . The battery indicator light will
Flash Green while charging . When light goes out the charge is
complete . a full charge takes approximately two hours . .
Only use the charger provided in the box – do not use chargers
from other devices as this may damage your headset . also you
should not use your supplied SUPrEME charger to charge other
devices .
NOTE: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
WeARInG stYLe
The Jabra SUPrEME is ready to be worn for right ear wearing, but
if you prefer left ear wearing remove the ear hook and turn it and