Jabra PRO 930 User Manual - Manual (Page 27)

27
english
Q Is it possible to set up an automatic dial tone for my softphone when I
undock my headset?
a Yes, for supported softphones the Jabra PRo 930 can be configured to
automatically get a dial tone when the headset is undocked.
1. Launch Jabra Control Center, and select the ´softphone´ tab.
2. select/deselect the ´open link when headset is undocked´ setting, and
then click apply.
Q What is the range on the Jabra PRO 930?
a Jabra PRo 930 supports a maximum range of up to 120 m (base to headset).
Range will vary depending on the environment the headset is used.
Q Can I make a conference call using multiple headsets?
a Yes, the Jabra PRo 930 is able to pair with four headsets in total for
conferencing: one primary, and three secondary headsets (narrowband) or
one secondary headset (wideband).
Q Can I password protect my settings
a Yes, you can password protect your settings in Jabra Control Center. If
password protection is on, you cannot change your advanced settings or
reset the Jabra PRo 930 to the factory default settings.
Q Can I turn the headset off to save power when I’m away from the base?
a Yes. Press and hold the headset multi-function button on the headset for five
seconds to power the headset off. to power the headset back on, dock the
headset with the base, or tap the multi-function button.
Q How do I switch audio from wideband to narrowband, or vice versa?
a You can change between wideband and narrowband audio in Jabra Control
Center.
Q What is the talk time for a Jabra PRO 930 headset?
a Wideband is up to 6 hours talk time. narrowband is up to 8 hours talk time.
Q My headband/earhook/neckband is broken. How do I purchase another
one?
a Please contact your local Jabra supplier.