Jabra PRO 930 User Manual - Manual (Page 22)

22
english
7.4 POWER mANAGEmENT
the Jabra PRo 930 provides several built-in power management features for
conserving energy.
Auto sleep mode
auto sleep mode can be enabled using the Jabra PRo 930 base (see section
7.7). auto sleep mode is off by default. When enabled, the Jabra PRo 930 will
automatically enter sleep mode after 8 hours of inactivity, as
indicated by the battery indicator slow flashing blue. sleep mode will end
when docking or undocking the headset.
NOTE: If the Usb cord is disconnected from the PC or the PC goes into sleep
mode, the base will automatically enter sleep mode.
Automatic headset power off
after 60 minutes of no audio link between headset and base, the headset
will automatically power off. to power the headset on, tap the multi-function
button.
7.5 PC AUDIO DETECTION
the Jabra PRo 930 can be configured to automatically open an audio link
between headset and PC when sound is detected on the PC. automatic PC
audio detection is default-enabled.
Enable/Disable PC audio detection
1. Launch Jabra Control Center, and select the ´softphone (PC)´ tab.
2. select the relevant setting under ´PC audio control´, and then click apply.
7.6 LISTENING TO mUSIC
Music played on a PC connected to the Jabra PRo 930 will automatically play
in the headset. alternatively double tap the multi-function button to keep the
audio link open.