Hydro-Logic StealthRO200 - Drinking Water Upgrade Kit - Manual (Page 2)

Instructions
Continued on Back
3
1) Screw on tank valve. The threads on
take have teflon tape on them to prevent
leaks. 2) Insert 1/4” blue tubing. 3) Insert 1/4” tee to opposite end of
tubing.
4
4) Insert tubing to 1/4” tee, then insert tubing into
remineralizing post filter.
This kit allows you to add a pressurized holding tank as wells as a post remineraliztion filter to your stealth RO100 or stealth RO200 for the purpose of drinking
water. This can be connected to an above the sink faucet. This kit comes with one length of tubing, be sure to cut tubing with a sharp knife or optional tubing snips
(HL#24005).