HYDAC CMWIN - Manual (Page 24)

CMWIN ENGLISH Page 24
Edition 06/2007
3.6.6 Remove Channels
CAUTION:
This action cannot be undone!
• To remove, i.e. not just hide, individual measurement channels, click on the “Edit“
dialogue box and select “Remove channels“ in the dropdown menu.
• A new window opens in which all the channels of the recording are listed.
• Select the channels to be removed by clicking on the checkbox next to their name. A
checkmark appears in the checkbox.
• You can undo your selection by clicking on the checkbox again so that the checkmark is
removed.
• When you have selected all of the channels to be removed, click on “OK“ at the lower
edge of the window.
• Click on “Cancel“ to cancel the action.
3.7 File Dialogue
The dropdown menu of the “File“ dialogue box contains various possibilities for retrieving,
saving, etc. recordings.
3.7.1 Open
• See”3.3 Retrieving a Measurement Curve”
3.7.2 Save
• To save a recording, click on the “File“ dialogue box and select “Save“ in the dropdown
menu, or click on “Save“ at the bottom left of the window.
• If the file has already saved no window opens; only the changes are saved.
• If the recording has not yet been saved, the “Save recording as…“ window opens.
3.7.3 Save As
• To save a file which hasn't been saved or to save a file under another name, click on the
“File“
dialogue box and select “Save as…“ in the dropdown menu, or click on “Save
as…“ at the bottom left of the window.
• The “Save as…“ window opens.
3.7.4 Save All
• To all changes in all files, click on the “File“ dialogue box and select “Save all“ in the
dropdown menu, or click on “Save all“ at the bottom left of the window.
• If all recordings have been previously saved, saving occurs without any new window
opening.
• If one or more of the recordings have not yet been saved, the “Save recording as…“
window opens.
3.7.5 Export
The export function enables you to save measured data in a format that can be exported to a
spreadsheet program (e.g. Excel), for example.
• To export a file, click on the “File“ dialogue box and select “Export…“ in the dropdown
menu, or click on “Export…“ at the bottom left of the window.
• Now the “Export data“ window opens.