HiRO H50113 V92 56K - Manual (Page 25)

Hiro H50113
24
Command Function
E0 Disables echo command.
E1 Enables echo command (default).
B—Communication Standard Setting
Use this command to select the communication standard used by
the soft modem.
Result codes:
_
OK if = 0—3, 15, 16.
_
ERROR if
≠0—3, 15, 16.
Command Function
B0 Selects CCITT V.22 mode when the modem is at
1200 bits/s.
B1 Selects Bell 212A when the modem is at 1200
bits/s (default).
B2 Deselects V.23 reverse channel (same as B3).
B3 Deselects V.23 reverse channel (same as B2).
B15 Selects V.21 when the modem is at 300 bits/s.
B16 Selects Bell 103J when the modem is at 300
bits/s (default).