HiRO H50083 V92 56K - Manual (Page 10)

10
L - Speaker Volume
This command sets the speaker volume control according to the parameter supplied.
Syntax
L[]
Defined Values
Decimal number corresponding to the selected option.
0
Low speaker volume.
1 Low speaker volume. (Default.)
2 Medium speaker volume.
3 High speaker volume.
Result Codes
OK = 0 to 3.
ERROR Otherwise.
M - Speaker Control
This command controls speaker on or off according to the supplied parameter.
Syntax
M[]
Defined Values
Decimal number corresponding to the selected option.
0 Speaker off.
1
Speaker on during call establishment, but off when receiving carrier. (Default.)
2 Speaker on.
3 Speaker is off when receiving carrier and during dialing, but on during answering.
Result Codes
OK = 0 to 3.
ERROR Otherwise.