Cb4 condensation board installation guidelines – GreenGuard CB4 CONDENSATION BOARD User Manual

Page 2

1-800-241-4402 www.green-guard.com

CB4 CONDENSATION BOARD
INSTALLATION GUIDELINES

Compliance—CB4 Condensation Board complies with all
relevant building codes. For the most current compliance
information, go to green-guard.com.

GreenGuard

Disclaimers

• WARNING: Foam insulation will ignite if exposed to fire

of sufficient heat and intensity. Protect these products from
exposure to open flame or other ignition sources during
shipping, storage, and installation.

• GreenGuard CB4 may be left uncovered only in post-frame

buildings which are not routinely occupied by humans. Such
buildings may include those used for animal containment,
storage of crops, or equipment. All ignition sources must be
kept far enough away from all combustibles, including CB4,
to prevent fire. If proper distance cannot be maintained,
CB4 must be protected by an appropriate ignition barrier
whenever the ignition source is active.

• Moisture Management of GreenGuard Foam: GreenGuard

extruded polystyrene foam insulation (XPS) is made of
synthetic materials that are generally recognized as not
providing a food source for insects, fungus, mold, or
mildew. GreenGuard foam insulation should always be
properly installed and stored.

• Pactiv Building Products believes the information and

recommendations herein to be accurate and reliable.
However, since use conditions are not within its control,
Pactiv Building Products does not guarantee results from
use of such products or other information herein and
disclaims all liability from any resulting damage or loss.
NO WARRANTY, EXPRESS OR IMPLIED, IS GIVEN AS
TO THE MERCHANTABILITY, FITNESS FOR PARTICULAR
PURPOSE, OR OTHERWISE WITH RESPECT TO THE
PRODUCTS REFERRED TO.