Grayhill Single Deck Rotary Switches 51 Series - Manual (Page 7)

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Single Deck Rotary Switches
Series: Series 51 (30°; 22.5°)
Style*: Letters from Choices Chart
Angle of throw: Use 22 (for 22.5°), 30
51SPt30–01–1–12S–F
Stop Arrangement: Needed only with 1 pole switches with
maximum positions. Leave blank for continuous rotation;
add F for fixed stop.
type of Contacts: N = Non-shorting, S = Shorting
Positions Per Pole: 02 as a minimum to the maximum allowable
for the angle of throw and the number of poles per the Choices Chart.
Use Letters AJ in this location if adjustable stop switch is ordered.
Poles per Deck: See chart
Number of Decks: 01 only
ORDERINg INFORMAtION: Series 50
ORDERINg INFORMAtION: Series 51
ADDItIONAL FEAtuRES
Economy keylock switch, isolated position, spring
return, and coded switches are available in similar
series. See Keylock and Special Function Rotary
Switch sections.
Available from your local grayhill Distributor.
For prices and discounts, contact a local Sales Office,
an authorized local Distributor, or Grayhill.
Series: Series 50 (36°, 45°, 60°, or 90°)
Style*: Letters from Choices Chart
Angle of throw: 36, 45, 60, or 90
50At36–01–1–10N–F
Stop Arrangement: Needed only with 1 pole switches with
maximum positions. Leave blank for continuous rotation;
add F for fixed stop.
type of Contacts: N = Non-shorting, S = Shorting
Positions Per Pole: 02 as a minimum to the maximum allowable
for the angle of throw and the number of poles per the Choices Chart.
Use Letters AJ in this location if adjustable stop switch is ordered.
Poles per Deck: See chart
Number of Decks: 01 only
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying
the military part number identified on the appropriate slash sheet.
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying
the military part number identified on the appropriate slash sheet.