General Machine Products 89004 Portable Powered Duct Rod Pusher - Manual (Page 25)

Page 25 of 40
General Machine Products Co., Inc.
8. PROCEDURE FOR REPLACEMENT OF SUB-DUCT COLLETS
THE MACHINE IS SUPPLIED WITH COLLETS FITTED FOR 1 1/4” SDR SUB DUCT.
SUB-DUCT CLAMP COLLETS
Tools Required 4mm Allen Key
Step 1 Collet Removal
a. Open the sub-duct clamp.
b. Remove the socket head cap screws (2) – using a 4mm allen key and remove the collet
(2).
Step 2 Collet Refitting
a. Select he replacement collets
b. Clean the sub-duct clamp with a dry cloth.
c. Fit the required collets and secure with a socket head cap screws – using a 4mm allen
key.
d. Close the sub-duct clamp.