General Machine Products 89004 Portable Powered Duct Rod Pusher - Manual (Page 15)

Page 15 of 40
General Machine Products Co., Inc.
14. Insure that the hydraulic control
lever is in the “OFF” position and
the speed control knob is in the
“Min” position (fully rotated
counter-clockwise).
15. The emergency stop button is set
to on (upper most position). If not
set, twist counter-clockwise to re-
set.
16. Start the engine on the power
pack. Insure that you have
enough fuel for the duration of the
pushing operation.
17. Select desired pushing direction
from the valve to the rear of the
machine. Direction is indicated.