Gardman Superior Feeding Station Kit - Manual

A
B
H
C
D
E
N
F
K
G
I
J
K
L M
A01343
B E F
G H I J
C D K x 5 L x 1
M x 2 N x 2
A
Contents
Care
We recommend that you clean all
the Feeding Station accessories in
a mild disinfectant solution once
every two months or more often in
warm weather. Remove as much
old food and debris as possible.
Wash in the solution and thoroughly
rinse with clean water.
Periodically reposition your Feeding
Station to a different area within
the garden to avoid an accumulation
of unhygienic deposits.
An extension kit is available from
the Helpline desk. This will increase
the height of the pole by 70cm (2’3”).
Please quote part no: A01342ext.
Assembly
SUPERIOR FEEDING
STATION KIT FOR
WILD BIRDS
Instructions
Accessories D, E and F should be
fitted to the top pole (H) prior to
assembling the remaining parts
of the pole. The position of the
accessories is flexible as they can
be moved up and down the pole.
Once chosen they are locked in
place by the wing bolts (K).
The plastic moisture protection
sleeves (N) should be slipped on
the poles (I & J) prior to assembling
the poles. The poles are held
together with the small self tapping
screws (M). Slip the moisture
protection sleeve down to cover
both the screw and the joint.
We recommend that at least 41cm
(16") of the pole is below ground.
The bird bath should be positioned
on the pole so that food and other
debris does not fall into the water
and contaminate it.
Assemble the feeders by attaching
the small base to the feed tubes.
Bases and tops are attached to the
feeder tubes with a twist - lock
bayonet action. The clear plastic
seed feeder tube should be
attached to the base that has the
fold down wire perches. The base
without perches attaches to the
wire mesh peanut feeder tube. The
suet feeder requires no assembly.
Fill each feeder with an appropriate
feed and attach the domed top piece.
GARDMAN LIMITED
Moulton, Spalding,
Lincolnshire, PE12 6QD, UK.
Helpline: 01406 372227
Feeding Station Kit Instructions x6:Feeding Station Kit Instructions x6 10/6/09 16:11 Page 6