BT MANGO - Manual (Page 35)

Dial mode
1. Press or until Base Settings is displayed then
select the OK option.
2. Press or until Dial mode is displayed then select
the OK option.
3. Press or to highlight the dial mode you want.
4. Select the OK option. You will hear a confirmation tone.
5. Press and hold to exit and return to standby.
Restore default settings
You can restore your BT Mango to its default (original)
settings. Please note this will delete your phonebook,
redial and calls list.
1. Press or until Base Settings is displayed then
select the OK option.
2. Press or until Restore settings is displayed
then select the OK option.
3. PIN Code? is displayed. Enter your 4 digit PIN code and
select the OK option. After a few seconds the handset
power switches off and the base beeps. The handset will
then switch itself back on and show the standby display.
35 Base settings
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Your BT Mango is pre-set to Tone
dialling. The dial mode options are
Tone (Time Break/Earth) or Pulse
(Earth).