BT MANGO User Manual
Page 28
SIM PIN Error
is displayed and the display will return to
the phonebook menu.
Access code
1. Select option.
2. Use or to
select
Access code
and press
OK
.
3.
On
and
Off
are displayed as options. Either, select
On
to
activate prefix dialling.
Code:
is displayed. Enter the
prefix you require, e.g. 9 and select
OK
. You will hear a
confirmation beep and the display will return to the
phonebook menu. Or, select
Off
to deactivate prefix
dialling. The display will return to the phonebook menu.
Change the SIM code
1. Select the
option. The phonebook entry you used last
is displayed.
2. Select
Opt
, scroll
to
SIM Code
and select
OK
.
3. Use or to
select
either
Country Code
,
National
Code
or
International Code
and select
OK
.
4. Using the keypad, enter the dialling code and select
Save
.
You hear a confirmation beep.
5. Press and hold
to exit and return to standby.
Menu
Menu
28
Using the phone
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
SIM Country Code
These settings control the
conversion of numbers from mobile
format which may include +44 and
may have the 0 removed from the
area code. You should not normally
need to alter these settings if you
are using your BT Mango in the UK
and your mobile to call UK
numbers. If this is not the case,
then please call the BT Mango
Helpline for assistance on 0870
605 8047.
The PIN number will be displayed
as asterisks for security reasons.
You will hear a sample ring for all
settings (except Off).
If your BT Mango is connected to a
switchboard, you may need to
enter an access code in the dialling
sequence to be able to connect to
the outside line.
The access code will not be used
when you dial the number yourself
(rather than for example from the
phonebook) to allow you to make
calls to other switchboard
extensions.