EUCHNER ActiveX Module serial/USB - Manual (Page 9)

Manual EKS ActiveX
®
Module serial / USB
3.4.5 getData
 Description Reading access to the internal memory area of the ActiveX  module, in which the read
data of the method Read or the event OnKey are stored.
 Syntax short = getData (short ByteIndex);
 Comments With the method getData, the internal memory area of the ActiveX

module can be
read. Upon triggering the events OnRead or OnKey, the key data are available in the
internal memory and can be read using getData. In the properties StartAdress and
CountData, the range is defined from which byte data shall be read (method Read).
Information!
This is an additional way of accessing the internal memory of the ActiveX
 module. This method can
be used in programming environments which do not offer array support. Usually, the internal memory
area is accessed via the property Data, see section 3.5.14.
3.4.6 setData
 Description Writing access to the internal memory area of the ActiveX  module, in which the data to
be written of the method Write are stored.
 Syntax object.setData (short Bytelndex, short DataValue);
 Comments With the method setData, the internal memory area of the ActiveX  module can be
written. Upon triggering the event OnWrite, the data are written from the temporary
storage to the key. In the properties StartAdress and CountData, the range is defined
from which byte data shall be written (method Write).
Information!
This is an additional way of accessing the internal memory of the ActiveX
 module. This method can
be used in programming environments which do not offer array support. Usually, the internal memory
area is accessed via the property Data, see section 3.5.14.
098655-03-10/12 Subject to technical modifications Page 9 / 20