EUCHNER ActiveX Module serial/USB - Manual (Page 7)

Manual EKS ActiveX
®
Module serial / USB
3.3 Overview of the methods, properties and events in the EKS ActiveX ®
module
The EKS ActiveX ® module contains methods, properties and events that can be integrated into your
programming environment.
 Methods are used for establishing the connection and transferring data between the user program and the
EKS Electronic-Key adapter.
 Properties are used for settings, reflect states and contain data read from the Electronic-Key or that are to
be written to the Electronic-Key.
 Events report the completion of a method or signal an event (e. g. Electronic-Key inserted).
All methods, properties and events for the EKS object are listed in the following table.
Methods Section
Open 3.4.1 Open
Close 3.4.2 Close
Read 3.4.3 Read
Write 3.4.4 Write
Properties Section
BaudRate 3.5.1 BaudRate
Port 3.5.2 Port
KeyType 3.5.3 KeyType
LastState 3.5.4 LastState (ReadOnly)
StartAdress 3.5.5 StartAdress
CountData 3.5.6 CountData
BlockSize 3.5.7 BlockSize
PollingTime 3.5.8 PollingTime
Opening 3.5.9 Opening
Reading 3.5.10 Reading
Writing 3.5.11 Writing
KeyState 3.5.12 KeyState
Version 3.5.13 Version
Data 3.5.14 Data
Debug 3.5.15 Debug
Events Section
OnKey 3.7.1 OnKey
OnRead 3.7.2 OnRead
OnWrite 3.7.3 OnWrite
098655-03-10/12 Subject to technical modifications Page 7 / 20