Behringer BCR2000 User Manual

Page 7

B-CONTROL FADER BCF2000/B-CONTROL ROTARY BCR2000

CONTROLLER connector (BCF2000 only). Here, you can

connect an expression pedal that can be used for controlling

assignable MIDI data.
The POWER switch turns your B-CONTROL on. The

POWER switch should always be in its Off position when

connecting the unit to the mains.

Please keep in mind: The POWER switch does not fully

disconnect your B-CONTROL from the mains. Always

unplug the power cord from the mains if you dont intend

to use your B-CONTROL for longer periods of time.

Fig. 3.1: The control surface of the B-CONTROLs

Fig.3.2: The back of the BCF2000 (control elements

coincide with the BCR2000)

3. CONTROL ELEMENTS AND CONNECTIONS

The connection to the mains is established using a standard

connection socket. A matching cable is included in the

shipment.
SERIAL NUMBER. Please take the time to fill out and return

the warranty card within 14 days after the date of purchase

to benefit from our extended warranty. The serial number is

located on the top side of your REV2496. You can also