Briggs & Stratton 040213 - Manual (Page 11)

INSTALLATION
11
Access Doors
The Home Generator System is equipped with an
enclosure that has three access doors (Figure 3).The doors
are named for a significant component located behind
them. Starting with the side that has the fuel connection
and proceeding clockwise, the doors are named:
• Oil Fill door
• Control Panel door
• Oil Drain door
Each Home Generator System is equipped with two
identical keys.These keys fit the locks that secure the
access doors.
To Open an Access Door:
1. Insert key into lock of access door you wish to open
and turn one quarter turn counterclockwise.
2. Grasp door’s handle and turn one quarter turn
counterclockwise to open. Remove key.
To Close an Access Door:
1. Close door and turn doors handle one quarter of a
turn clockwise.
2. Insert key into lock of access door and turn one
quarter turn clockwise. Remove key.
Oil Fill Door
Fuel Inlet
Exhaust
Port
Contr
ol Panel Door
Oil Drain Door
Exhaust Bulkhead
Figure 3 — Enclosure Access Doors
• DO NOT touch hot surfaces.
• Allow equipment to cool before touching.
Running engines produce heat.Temperature of
exhaust port and nearby areas can reach or
exceed 600°F (316°C).
Severe burns can occur on contact.
WARNING