BenQ Digital Projector MS612ST - Manual (Page 49)

Operation 49
Function Description
Quick Auto
Search
See "Switching input signal" on page 24 for details.
Color Space
Conversion
See "Changing Color Space" on page 24 for details.
Presentation
Timer
Reminds the presenter to finish the presentation within a certain time
frame. See
"Setting the presentation timer" on page 30 for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 20 for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
"Choosing a location" on page 13 for details.
Menu
Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets the reminder messages on or off.
Operation
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
"Setting Auto Power Off " on page
54 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
"Hiding the image" on
page 31 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote
receiver on the projector.
3. SOU
RCE me
nu
4.
SYSTEM SETUP: Basic menu