BenQ Digital Projector MS612ST - Manual (Page 11)

Introduction 11
Remote control
1. POWER
Toggles the projector between standby mode
and on.
2. Freeze
Freezes the projected image.
3. CAPTURE
Captures the projected picture and save it as
your startup screen.
4. Left/
Starts the FAQ function.
5. BLANK
Used to hide the screen picture.
6. Digital Zoom (+, -)
Magnifies or reduces the projected picture
size.
7. Volume +/-
Adjusts the sound level.
8. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
9. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection.
10. Auto
Automatically determines the best
picture timings for the displayed image.
11. Right/
Activates panel key lock.
When the On-Screen Display (OSD)
menu is activated, the #4, #9, and #11
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
12. SOURCE
Displays the source selection bar.
13. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
14. Timer On
Activates or displays an on-screen timer
based on your own timer setting.
15. Timer Set up
Enters presentation timer setting directly.
16. PAGE UP/PAGE DOWN
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).
Capture
16
1
9
5
8
4
11
12
13
14
2
6
7
15
9
3
10