ElmoMC Power Supplies-TAM-20 - Manual (Page 8)

Tambourine 20 Power Supply Installation Guide
MAN-TAMIG (Ver. 1.501)
|Directives and Standards| www.elmomc.com
8
Table of Contents
1.3 Directives and Standards
The Tambourine 20 power supply conforms to the following industry safety standards:
Safety Standard Item
UL 508C Recognized Power Conversion Equipment
In compliance with UL 840 Insulation Coordination, Including Clearance and
Creepage Distances of Electrical Equipment
In compliance with UL 60950-1
(formerly UL 1950)
Safety of Information Technology Equipment,
Including Electrical Business Equipment
IEC/EN 61800-5-1 approved Safety for adjustable speed electrical power drive
system
IEC/EN 61800-3 approved EMC for adjustable speed electrical power drive
system
In compliance with EN 60204-1 Low Voltage Directive, 73/23/EEC
The Tambourine 20 power supply has been developed, produced, tested and documented in
accordance with the relevant standards. Elmo Motion Control is not responsible for any deviation
from the configuration and installation described in this documentation. Furthermore, Elmo is not
responsible for the performance of new measurements or ensuring that regulatory requirements
are met.
1.4 CE Mark Conformance
The Tambourine 20 power supply is intended for incorporation in a machine or end product. The
actual end product must comply with all safety aspects of the relevant requirements of the
European Safety of Machinery Directive 98/37/EC as amended, and with those of the most recent
versions of standards EN 60204-1 and EN 292-2 at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive
73/23/EEC concerning electrical equipment designed for use within certain voltage limits, the
Tambourine 20 power supply meets the provisions outlined in Council Directive 73/23/EEC. The
party responsible for ensuring that the equipment meets the limits required by EMC regulations is
the manufacturer of the end product.
1.5 Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the time
of installation, or 18 months from time of shipment, whichever comes first. No other warranties,
expressed or implied — and including a warranty of merchantability and fitness for a particular
purpose — extend beyond this warranty.