ECOXGEAR IRD4000: Allegro User Manual
Page 19

19
5. Turn the knob until the display says
< Set Time/Date >
Set Alarm
DST
6. Press the ‘Select’ button.
Pacific
Central
Eastern
7. Turn the knob until the correct time zone is seen on the display. Push the ‘Select’ button to set your
time zone. Then turn the Menu knob until the hour setting is correct, then press the ‘Select’ button.
Set Time
1:30 PM
8. Turn the knob until the minute setting is correct, then press the ‘Select’ button.
Set Time
1:34 PM
The display shows
menu, press the ‘Back’ button 2 times to go to the main menu.