ECOXGEAR IRD4000: Allegro - Manual (Page 11)

11
Steps for Connecting Your Radio to Your Wireless
Network
Getting Started
Step 1 - Power up the radio
Connect to the AC Power on the back of your ALLEGRO. The radio can be switched on or off with the
STANDBY/ON button. You may also choose to use Alkaline or Rechargeable NiMH batteries to power
your ALLEGRO (Rechargeable batteries will charge when power adapter is plugged in )
CAUTION: Use only the power adapter supplied with ALLEGRO. Connecting a power supply with a
different rating will cause permanent damage to ALLEGRO and may be hazardous. Adapter can be
used while Alkaline (non-rechargeable) or Rechargeable NiMH batteries are installed.
The display on the front of the radio will light up and show:
Grace Digital Radio
After a few seconds, the screen will change to show :
Initializing
Network
After a few seconds, the screen will change to show:
Scan for networks
Enter network
View Config
Edit Config