Step 2 - scan for a wireless network connection – ECOXGEAR IR2600: Innovator X User Manual
Page 14
14
After a few seconds, the screen will change to show:
Initializing
Network
After a few seconds, the screen will change to show:
Scan for networks
Enter network
View Config
Edit Config
Step 2 - Scan for a wireless network connection
When the display shows brackets next to the words
(NOTE: IF you make an error at any point, press the ‘Back’ button to return the previous screen)
The WI-FI INTERNET RADIO will now scan for all available wireless networks and will display:
Scanning
IIIIIIIIIIIIIIIIIII
IF the radio does not find a wireless network router, the display will show:
No networks
Found
IF this happens after subsequent attempts you should check the status of your Wi-Fi router - see the
instructions supplied with your wireless router / modem or contact the person who set up your home
computer network.
When the WI-FI INTERNET RADIO finds your wireless network, the display will show the SSID (the
name of your home wireless network) - this is the name ascribed to your Wi-Fi router by the person who
set up your network - for example: