ECOXGEAR ITCIR1000: Original Grace Internet Radio - Manual (Page 9)

9 grace wireless internet radio
If it can’t find one then the display will say:
STEPS FOR CONNECTING YOUR RADIO TO YOUR
WIRELESS NETWORK (continued)
No networks
Found
If this happens then you will have to get your wireless access point working - see the
instructions supplied with it.
When the radio finds your wireless network, it displays the ESSID for the access point on
the screen - this is a name that is allocated to the access point by the person who set up the
network - for example:
< My Home Network >
It is possible, and in some locations highly likely, that your radio will find more than one
wireless access point, in which case you can choose which one you want to connect to. Turn
the knob on the radio to see the ESSID for each access point the radio has found.
When the ESSID for the access point you want to connect to is displayed on the screen,
press the SELECT button.
If your network is not configured to need an encryption code, the screen should say:
Step 3 - Connect to the wireless network
Connecting to
network