ECOXGEAR ITCIR1000: Original Grace Internet Radio - Manual (Page 8)

8 grace wireless internet radio
STEPS FOR CONNECTING YOUR RADIO TO YOUR
WIRELESS NETWORK
First, connect to the AC Power. In use, the radio can be switched on or off with the
STANDBY/ON button.
The display on the front of the radio will light up and say:
Step 1 - Power up the radio
Reciva Radio
ARM Powered
After a few seconds, this will change to show:
Initializing
Network
After a few seconds, this will change to show:
< Scan for networks >
Enter network
View Config
Edit Config
When the display says < Scan for networks >, press the SELECT button.
(Note: if you make a mistake at any point, press the BACK button to go back to the
previous screen.)
The radio will now scan for all available wireless networks and will display:
Step 2 - Scan for a wireless network connection
Scanning