Enter wep key, Enter wpa key, Network ok – ECOXGEAR ITCIR1000: Original Grace Internet Radio User Manual

Page 10

grace wireless internet radio

STEPS FOR CONNECTING YOUR RADIO TO YOUR
WIRELESS NETWORK (continued)

If the screen displays either:

Enter WEP key

Or:

Enter WPA key

Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP)

or Wi-Fi Protected Access (WPA). You therefore need to enter the correct WEP or WPA code

into the radio to get it to communicate with your network.

Only the person who set up the network in the first place knows this code; if that person is

not you then you need to find out what it is.

After 3 seconds, the display goes into the code entry mode. To enter the code, use the

knob to select each character of the code in turn, pressing the SELECT button after each

character. Note that WEP and WPA codes are sensitive to upper and lower case characters

so you must enter them exactly.

Use the BACK button to erase incorrect characters.

After the final character, use the knob to select the END character and press the SELECT

button.

The radio should now be able to connect to the network.

If the display shows “Invalid key” or “Network Error”, an incorrect password has probably

been entered.

Then:

Network OK