Eberspacher Calltronic - Manual (Page 11)

VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 11
DisPlays DEscriPtioN
ƒ rEmEDial actioN
button flashes once cyclically
(every 2 seconds). ƒ Calltronic is ready for use.
button flashes once cyclically
(every second). ƒ preset time is activated.
button flashes twice cyclically network error
ƒ Contact network operator.
siM card error
ƒ Check siM card in mobile phone, replace if neces-
sary.
Antenna laid incorrectly.
ƒ Check installation, if necessary renew antenna.
button flashes 4 times cyclically puk code error
The error is displayed only briefly after the voltage is
applied, then button flashes twice.
Correct puk code error as follows.
ƒ set the puk and pin code 1234 with the mobile
phone or deactivate the pin code query.
ƒ switch on again after power interruption.
button flashes quickly Calltronic has received 20 sMs within 30 minutes and
automatically switches off.
ƒ keep button pressed for 5 sec., Calltronic is reset
to the factory settings. by doing this, the system
is initialised within approx. 5 minutes, i.e. all the
customer’s data is deleted and has to be re-entered.
ƒ keep the button pressed for 5 sec, if the display is
repeated:
– Replace siM card
3 DispLAys AnD MALFunCTiOns