Page 5 of 7, Bed assembly continued, Tv installation kit – Dreams Barcelona TV Bed User Manual
Page 5: Troubleshooting

Aerial
Wall Socket
11
Aerial Socket
HDMI 1 & 2
10
Power Socket
1
2
AC 220V ~ 240V
TV
!
WARNING
HAXARDOUS VOLTAGE
Contact mav cause
electric shock or burn
This unit is to be servied by
trained personnel only.
FOOTBOARD
2
I
S
x4
T
x1
TV INSTALLATION KIT
Bed Assembly continued
Stage
5
Television Installation
Before fixing the slats to the
Bedstead, please follow the television installation instructions below.
1.
2.
3.
7.
Lid
IMPORTANT:
Care
should
be
taken
when
connecting
electrical
items.
If
in
any
doubt
over
the
connections
please consult a qualified electrician.
5.
4.
TROUBLESHOOTING
If your television does not operate please check all the power connections both to the wall and to the socket
on the footboard.
If you TV Lift does not operate, try both of the switches mounted on each side of the bed to check if both are
NOT working. If only one operates change the batteries in the one not working - see following instructions.
If either the television or TV Lift still fails to operate there may be a problem that can be checked by our
technicians. Call the Customer Services number for help and information - 08442 92000.
2.
1.
3.
Connect the power cable (10) and aerial cable (11) to the sockets located at the bottom of the footboard (2)
and then connect to your wall sockets.
Connect media using the HDMI sockets (HDMI cables not supplied).
Raise the TV lift by pressing one of the UP buttons located on either side rail of the bed.
Unpack your television and remove the four ‘VESA’ screws from the back of the TV or from the TV package.
Connect the television to the TV mounting
bracket using the screw-washer set (S).
If necessary you can
use the spanner to adjust the bracket up and down to align with the screw fixing points
on the back of the television.
Carefully tighten the screw (S) using the allen key (T) - the spanner & allen key can be found in the TV
installation kit, in the main hardware pack.
Connect the power and aerial cables to the television making sure the cables are not loose. If necessary use
spare clips (M) to route cables safely.
The television can now be operated following the manufacturers handbook.
To lower the television back into the footboard, press one of the side rail DOWN buttons.
When DOWN button is pressed, TV will retract into footboard and turn off automatically at the bottom .
When UP button is pressed - TV rises and turns itself back on automatically.
6.
Page 5 of 7
TV Mounting Bracket
2
2
1
x4
D
x2
D
I
UP
DOWN
T
S