BUSH High Definition Digital Set Top Box With USB Record DFTA46R - Manual (Page 23)

22
The image stopped
suddenly or mosaic
Problem Potential Reasons What to do
No picture Power isn't connected Connect the power
The power switch is not on Switch on the power
Screen shows
No Signal
DVB-T cable not connected Plug in the DVB-T cable
Incorrect setting Conduct a factory reset
No sound from
speaker No or incorrect connection
with audio cable Connect the audio cable
correctly
Sound on mute Turn off mute function
Adjust the volume. Volume is set to low
Only sound, no
image on the
screen No or incorrect connection
with AV cable Make sure cables are
connected correctly
The program is a radio
program Press key to
shift into TV mode
Remote Control
is not responding The battery is exhausted Change battery
Remote Control is not
facing or close enough
to the Set Top Box Adjust the position of the
Remote Control and move
closer to the unit
The signal is too weak Conduct a Factory Reset
Troubleshooting
USB not responding
USB is not connected
properly or does not
sufficient memory Reconnect the USB or
connect another USB