Bosch Divar -Digital Versatile Recorder - Manual (Page 51)

Bosch Security Systems
Divar | Installation Manual | Menu system EN | 5-9
>>> Multiscreen modes
• Pressing the multiscreen key on the unit cycles through all enabled
multiple view modes.
• Enable only those views you wish to see when you use the
multiscreen key.
• The multiscreen modes that are available depend on the number of
cameras connected and the Divar model.
>>> ATM/POS (requires bridge and license)
• ATM/POS data is viewed on monitor A in full-screen mode only.
• Select position, duration, text intensity and font size for display of
the ATM/POS data.
• Press the current camera key during Live or Playback mode to
switch the ATM/POS data display on and off.
S YSTEM S ETTINGS >
Use the System Settings menu to get access to those items that are used to
configure the system.
• Select the language for the menu from the list.
• Select Quick Install to quickly set up the system. The quick install menu
is described in Chapter 2.
• If you select Factory Defaults, all settings in the menu system are reset to
their default value.
>> RECORDING SETUP
• The continuous mode overwrites older recordings when the disk is full.
You can set an overwrite protection period of up to 15 weeks for the latest
recordings.
• The linear mode first gives a warning and then stops recording when the
disk is full. Older recordings must be manually deleted.
• Set the Pre-event time so that recording begins before an alarm is
activated. The maximum is 30 seconds.
MAIN MENU
SYSTEM SETTINGS
LANGUAGE ENGLISH
QUICK INSTALL >
RECORDING SETUP >
PLAYBACK SETUP >
EVENT SETUP >
HISTORY LOG SETUP >
LOCAL PASSWORDS >
CONNECTIVITY >
LICENSES >
INPUT AND OUTPUT CONTACTS >
FACTORY DEFAULTS