Bosch Divar -Digital Versatile Recorder - Manual (Page 29)

Bosch Security Systems
Divar | Installation Manual | Operating instructions EN | 3-11
• Fill in a time and date from which to start the search.
• Fill in an end time and date to limit the time span of the search.
• If ATM/POS is selected, fill in the text string (16 characters maximum)
you wish to search for. This text string is case insensitive.
• Select Start Search (or press F2) to initiate the search procedure.
• If Smart Motion Search is selected, you must set the motion sensitivity
and select an area before the search procedure is initiated.
• Use the arrow keys to adjust the Motion Sensitivity. The higher the
value, the higher the sensitivity.
• Select Motion Area to define the picture area that is to be examined for
motion.
• Use the arrow keys to move around the grid. Press F1 to insert a motion
detection area. Use the arrow keys to enlarge it.
• Press F1 again to save the area. Press the escape key to cancel and return
to grid square selection.
• Press the select key to leave the grid. F2 clears all motion detection areas.
• Select Start Search (or press F2) to initiate the search procedure.
• Press the escape key to exit the search mode and return to the
previous mode.
>> SEARCH RESULTS
• The recording fitting the filter and closest to the selected date and time is
shown first.
• Use the up/down arrow keys to move through a long list. The selected
recording is shown.
• Press the select key for a full-screen playback of the selected
recording.
• Press the search key during playback to return to the list.
• Press the escape key to return to the filter menu.
PLAYBACK SEARCH
SEARCH RESULTS
CAMERA 1 MOTION 2002-03-14 15:00:17