Dolan-Jenner LMI-6000 - Manual (Page 11)

6.3. Changing intensity
To change the intensity of the light output, rotate the Intensity dial on
the bottom right of the front panel. Rotating clockwise increases light
output and rotating counterclockwise decreases intensity.
6.4. Instructions for cleaning
6.4.1. The exterior of the illuminator can be gently cleaned with a soft
cloth
dampened with water and mild detergent.
Do not use any solvents or cleaner containing chlorine as these
will damage the illuminator and may void your warranty.
6.4.2. The ventilation slots can be cleaned by blowing aerosol- based
dusting air into the slots.
Do not blow compressed “shop-air” into the illuminator as such
air often contains oil and water mist which may degrade the
internal optics.
7. Product Ratings
CE
For all CE technical questions, contact Setra Systems, USA. EU customers may contact our EU representative Hengstler GmbH,
Uhlandstr 49, 78554 Aldingen, Germany (Tel: +49-7424-890; Fax: +49-7424-89500).