Beko WMI 71641 - Manual (Page 31)

EN 31
It continuously washes. Remaining time does not count down.
In the case of a paused countdown while
taking in water:
- Timer will not countdown until the
machine is filled with the correct amount of
water. (On models with display)
- Time might have gotten stuck during
heating step. (On models with display)
In the case of a paused countdown at the
spinning step:
There may be an imbalance of laundry in
the machine. (On models with display)
- The machine will wait until there is sufficient
amount of water to avoid poor washing results due
to lack of water. Then the timer will start to count
down.
- Time will not count down until the selected
temperature for the Programme is attained.
- The automatic spin correction system might have
been activated due to the unbalanced distribution of
the laundry in the drum.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
It did not spin.
- There may be an imbalance of laundry in
the machine. Therefore, the Programme
might have been completed without
spinning.
- The machine will not spin if the water has
not completely drained.
- The automatic spin correction system might have
been activated due to the unbalanced distribution of
the laundry in the drum.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Check the filter.
- Check the drain hose.
Washing performance is poor: Laundry turns grey
- Using insufficient amount of detergent
for a long time,
- Washing at low temperatures for a long
time,
- Using insufficient amount of detergent
for hard waters (soil can stick to the
laundry),
- Using excessive amount of detergent
(detergent can stick to the laundry).
- Use the recommended amount of detergent
appropriate for water hardness and the laundry.
- Select the proper temperature for the laundry to
be washed.
- If the water hardness is high, using an insufficient
amount of detergent can cause laundry to turn grey
over time.
- It is difficult to eliminate such greyness once it
occurs.
Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not be
whitened.
- Insufficient amount of detergent used.
- Excessive laundry loaded into machine
- Wrong Programme and temperature
might have been selected.
- Improper detergent may have been used.
- Wrong type of detergent used.
- Use recommended amount of detergent
appropriate for the laundry.
- Do not load the machine in excess.
- Select the proper Programme and temperature for
the laundry to be washed.
- Put the detergent in the correct compartment.
- Do not mix detergent with bleaching agents.