Beko WMI 71641 - Manual (Page 19)

EN 19
When the “Temperature” button is pressed
after Cold is selected, the maximum
temperature of the program you have
selected will be displayed.
To decrease the temperature, press the
“Temperature” button again.
90˚C
Normally soiled, white cottons and
linens. (Ex.: coffee table covers,
tablecloths, towels, bed sheets)
60˚C
Normally soiled, fade proof coloured
linens, cottons or synthetic clothes
(Ex.: shirts, nightgowns, pyjamas)
and lightly soiled white linen clothes
(Ex.: underwear)
40˚C
30˚C
Cold
Blended clothes including synthetics
and woollens as well as delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As “Intensive” and “Hygiene” programs are
long programs with higher temperature
selections to ensure hygiene, “Economy”
Symbol will not light up.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin” button . Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
F2 F4 F1 F3
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent
your clothes becoming creased when
there is no water in the machine. With
this function, your laundry is kept in the
final rinsing water. If you want to spin your
laundry after the rinse hold function:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine
drains the water and spins your
laundry.
You can use no spin function in order to
drain the water without spinning at the end
of the program.