Dascom T5040 Quick Start Guide - Manual (Page 13)

Quick start guide Control panel
9
EN
GLIS
H
Control panel The control panel consists of three keys for controlling the printer functions, four
LEDs displaying the status of the printer and a LCD display with 2 x 16 digits.
1 LCD display: Displays the internal printer status, operat-
ing instructions and error messages.
2 Paper LED: Displays if paper is inserted or not;
on = paper is inserted, off = no paper inserted.
3 User 1 LED: Lights up if the User 1 is active, blinks if the
printer is receiving data via the first interface (see below).
4 Ready LED: Displays if printer is offline or online;
on = online, off = offline.
5 User 2 LED: Lights up if the User 2 is active, blinks if the
printer is receiving data via the second interface (see
below).
6 USER 2 key: Activated by application only; the function-
ality of the key depends on the emulation and the applica-
tion used (see also User 2 LED).
7 STOP/EJECT key: Sets the printer to Online/Offline
mode (see also Ready LED); ejects inserted paper.
8 USER 1 key: Activated by application only; the function-
ality of the key depends on the emulation and the applica-
tion used (see also User 1 LED).
Please be aware that some emulations and applications may use the LEDs and
keys in an entirely different way defined by the emulation and/or host software and
outside the definitions contained in this document.
For a detailed overview of the individual functions of the control panel refer to the
User Guide on the Online CD-ROM.
Quick Start-en.book Seite 9 Dienstag, 5. Dezember 2006 10:48 10