Dascom 7206 Ethernet Installation Guide - Manual (Page 6)

– 6 –
8. To configure the network board, you can use the “PrintServer Network Tools”
included on the CD supplied with the printer. However, the easiest way to
configure the board is to use a Web Browser, such as Internet Explorer, running
on a PC connected to the same network.
9. If you have a “DHCP Server” operating on your network (a system that ‘gives
out’ network addresses to new equipment), you can easily find out the address
allocated to the printer by briefly press the blue button visible on the network
board’s bracket. This will generate the “network self-test page”, shown on the
previous page.
Configuring the Interface using Explorer