Dakota Ultrasonics PX-7 User Manual

Page 24

Dakota Ultrasonics

Differential Mode

1) Press ON/OFF key to power up the PX-7.

2) Press the DIFF key. DIFF OFF or DIFF followed by a thickness

value and flashing IN (or MM) will be displayed.

3) Repeat step 2 to toggle between DIFF OFF or DIFF value and

flashing IN.

4) Assuming DIFF value flashing IN is displayed, use the UP and

DOWN arrow keys to scroll to the desired nominal thickness value.

5) Press the SEND key once again to select the nominal value

entered.

6) The PX-7 is now ready to perform measurements using the

Differential feature.

RS232 Serial Port

The PX-7 is equipped with an RS232 serial port. Using the accessory

cable (part# N-306-0010), the PX-7 has the ability to connect to a

computer, or external storage device. The following section outlines the

procedure for connecting the PX-7 to a computer, and how to collect data

using any standard communications program: