Belkin Wireless USB Hub F5U303 - Manual (Page 10)

5
Installation
1
2
3
4
5
6
PIN-Association Procedure
When you initially set up the Hub, you must “associate” it
with the host computer. To do this, enter the PIN (product
identification number) found on the bottom of the Hub into
the Wireless USB Manager. This “PIN association” procedure
is one of two supported methods to establish a secure
wireless connection.
1. Plug the power supply into the wall, and then plug the
DC connector into the Hub.
2. Open the Wireless USB Manager to set up the
Hub’s security.
3. Click on “New Connection”.
4. Select “PIN Association” and click “Next”.
5. Enter the PIN into the space provided. The PIN can be
found on the bottom of the Hub.
6. The Wireless USB Manager will automatically detect the
Hub and provide customization options for the device
name and method of detection.
7. Click “Finish” to complete the setup and remove the
USB cable.
8. Verify that you have established a wireless connection
through the Wireless USB Manager. You should have an
icon for the Hub showing two arrows pointing to
each other.
9. Station the Wireless USB Hub in range and connect your
devices to access them wirelessly.