Cooper-Atkins 93710 - Manual

Handheld
USB port PC USB
port
Press the Power/Select button once to turn the unit on. Press and hold
the Power/Select button (for 2 seconds) to turn the unit off.
5. POWERING THE HANDHELD ON/OFF
3. SYNCHRONIZING MENUS WITH THE HANDHELD 6. CHARGING THE BATTERY
THE HANDHELD
(37100)
4. UPLOADING RECORDED DATA FROM THE HANDHELD TO THE PC
FOR TECHNICAL SUPPORT CONTACT:
Cooper-Atkins Corporation
33 Reeds Gap Road, Middlefield, CT 06455-0450 U.S.A.
860-347-2256 • Fax: 860-347-5135
www.cooper-atkins.com
Email: [email protected]
V1012
27-958615
To transfer programmed menu items, connect the PC to the Handheld with
the USB cable.
To charge the battery, either:
For specific and detailed operating instructions please
refer to the User Guide. To access the User Guide, on
the main toolbar, click Help>Contents.
Press the Synchronize button on the Menu Programming tab.
Menus will be downloaded to the Handheld. Once the transfer has completed,
unplug the Handheld from the PC. You are now ready to record data.
Refer to the User Guide>The HACCP Manager Handheld for instructions.
Once data is recorded, it can be uploaded onto a PC. Connect the Handheld
to the PC as outlined in step 3. Select the Database tab and then click on the
Upload Handheld... button.
Refer to the User Guide>The HACCP Manager Database for detailed instructions
on reviewing data.
QUICK START GUIDE
1. INSTALLING HACCP MANAGER TM SOFTWARE (Administrator privileges required)
Insert CD into disk-drive on computer and follow the instructions of the
installation wizard.
HACCP MANAGER TM SYSTEM REQUIREMENTS
• Windows XP, Vista, Windows 7
• Universal Serial Bus (USB) port
• 512 MB of memory
• 500 MB of hard disk space
• Compact Disk (CD) drive
If using Windows XP, and the installation does not start automatically:
- click on the button.
- click on the
RUN icon then edit the text as shown below e.g., if your
CD-ROM drive is “D:\” then change the drive letter to read “D:\SETUP.EXE”.
If using Windows 7 / Vista, the Autoplay dialog will automatically appear.
Select and click
RUN SETUP.EXE. If the installation does not start
automatically, click on the button then follow these instructions:
Vista - click on
RUN icon then edit the dialog box as noted above.
Win. 7 - click in “Search programs & files” box and edit the text as above.
If errors occur during installation, contact Cooper-Atkins Technical Support.
2. LAUNCHING THE HACCP MANAGER TM PROGRAM
Click the start button on the bottom of the taskbar, then click on the icon.
The following dialog box will display. You are now ready to program data.
Refer to the User Guide>The HACCP Manager Database for detailed instructions
on menu programming.
3. SYNCHRONIZING MENUS WITH THE HANDHELD (CONTINUED)
- connect the handheld to the PC as shown in step 3. The PC must be running
in order for the battery to be charged.
- connect the USB cable to the wall adapter (supplied) and the Handheld
USB port. Allow to charge for at least three hours.
Firmware
Version
Unique
Device ID
USB Port
Custom
Information
Memory
Usage
Date / Time
of Last
Upload
Keypad
Power / Select
Button
Up / Down
Scrolling
Buttons Left / Right
Navigation
Buttons
Protective
Boot
Calendar /
Clock