Comelit MT 40705 - Manual (Page 23)

Chapter 5 — Install w ith DVR Series
5.1 Install with Standalone DVR Series
When user wants to connect with DVR, proceed as the following order.
1. Connect RS232 cable between RS-232 Port of DVR and RS232 of the Keyboard.
(This connection enables DVR control remotely from KBD controller)
How to setup the KBD controller.
2.
A.
B.
C.
D. Turn the Keyboard ON
Input password (Factory setting is
)
Open the menu of the KBD controller by pressing
Set as below in Network menu. Key.
DOME1
RS232
:
:
Dome
DVR1-DVR4
3. How to setup DVR
A. Press “OK”, and the below screen will be appeared.
17
Com Ports
DOME2 : AUX IN
Set Baud Rate
DOME1 : 9600
DOME2 : 9600
RS232 : 9600
CTRL + MENU
9 9 9 9