2 network, Change administrator password, Set port set baud rate – Comelit MT 40705 User Manual
Page 16

Change Administrator Password
Save and Exit
This screen allows you to change administrator password.
Enter 4 digits password and press
. Factory Default setting is 9999.
Note) Factory default Administrator’s password is
+
.
User password is
+
3.2 Network
Set Port
Set Baud Rate
< J-BOX OFF>
< J-BOX ON>
10
Set Baud Rate
1.DOME1
: 9600
2.D2/DVR
: 9600
3.ALARMPC
: 9600
4.MUX/KBD
: 9600
5.DVR/AUX
: 9600
Save and Exit
Set Baud Rate
1.DOME1
: 9600
2.DOME2
: 9600
3.RS232
: 9600
Save and Exit
Set Baud Rate
Enters the Baud Rate setup submenu.
Com Ports
Enters the Communications Ports setup submenu.
Exit
Return to the previous menu.
1.Set Baud Rate
2.Com Ports
Exit(ESC)
1. J-BOX Set: OFF
Select to use the optional Junction Box or not.
2. Set Port
Select the baud rate and the connected unit’s protocol.
3. MUX Config
Set the multiplexer configuration.
4. Set Slave KBD
Select to use the slave keyboard or not.
Save and exit
Save the changed settings and return to the previous menu
ENTR
1
1
1
1
ENTR
9
9
9
9
ENTR
Current PW : XXXX
NEW PW : YYYY
Confirm PW : YYYY