Comelit MT IPNVR116A - Manual (Page 37)

37
following interface will pop-up
：
On the "Cruise" interface ,Set preset, residence time, cruise speed, and click
"Add" to add new cruise preset( support multiple presets) , click"Delete" to clear
the preset.
Call cruise: Select a needed cruise number in the drop-down list, and click" "
button.
Cruise delete: Select a needed cruise number in the drop-down list,and click "
delete" to clear the cruise.
3
）
"Track" setting: Select a track number in the drop-down list, click track start
buttons to make PTZ operation, and click again to finish, track memory
operate successfully.
Call track: Select a needed track number in the drop-down list, and click" "
button.
7. Manual record
Manual recording have highest priority, whatever state of each channel at present,click
"Manual" ,then all of the corresponding channel will do ordinary record,as shown in the
below picture: