2 channel parameters setting 5.2.1 display setting – Comelit MT IPNVR116A User Manual
Page 12

12
1
)
Device Info.
:
Check and modify the basic information
2
)
System Version
:
Edit the system version number
3
)
PTZ Setting
:
Modify the access dome cameras parameters
4
)
DST Setting: Enable and set DST parameters
5.2 Channel parameters setting
5.2.1 Display Setting
Select the relevant channel and modify the parameters on the "Display Setting"
interface, as shown in the below picture:
1
)
Channel
:
Modify the specified channel name
2
)
Local camera name
:
Modify the input devices channel name for specified channel
3
)
Time format
:
Select time display mode for the access devices
4
)
Date format
:
Select date display mode for the access devices
5
)
OSD Position
:
Set different display position for the access devices name and
display-time
6
)
Image Setting
:
Adjust the access devices brightness and contrast
(
Note
:
Except 1
)
, other options only efficient for privacy protocol equipments)