Comelit FT SB 09 - Manual (Page 14)

GROUP S.P.A.
FT SB 09 12
TEST DESCRIPTION
5) SELF – DIAGNOSIS
On power up, the apparatus carries out a diagnostic test of the connections to check cor-
rect communication with porter module ART.1602/4660.
If the word OK appears next to the item, then it has passed the test, otherwise, if the word
FAILED appears it has failed the test. On completion of the Self-Diagnosis mode, press
the
▼ key to put the module in the into its normal mode of operation.
The table summarising the meaning of the single tests is given below:
INIZIALIZING
SPEAK. SERIAL
MODE
Check the EEPROM which contains the user name list.
If the test fails, the module is faulty.
If the test fails, check correct serial connection
with porter module Art.1602 / 4660 .
Check presence of the alphanumerical keypad
which makes up Art.3340.
Since it is not provided for Art. 3342,
the wording 3342 must appear.
Scroll the list by means
of the
▲▼ keys.
To exit, press
the key
Press the key
to call the selected user.
ROSSI GIOVANNI The names are entered
in alphabetical order.
The call has been made
correctly.
The call has not been
made correctly.
The system is engaged.
ON DISPLAY DESCRIPTION OPERATION
CALL EFFECTED
Or:
USER NOT
AVAILABLE
Or:
USER BUSY
INITIAL CONDITION
6) USING THE NAME DIRECTORY
6A) SCROLLING AND CALLING THE USER SELECTED
During normal operation. SCROLL NAMES
SEARCH NAME
INITIAL CONDITION
6B) SEARCHING FOR A NAME IN THE DIRECTORY
Press the key
During normal operation
SEARCH THE NAME
BY ENTERING
INITIAL
And then:
SELECT INITIAL:
A B C D E F G …..
ON DISPLAY DESCRIPTION OPERATION
SCROLL NAMES
SEARCH NAME