Comelit MT 6101BM - Manual (Page 51)

51
ADVANCED
EN
CALIBRATING THE TOUCH-SCREEN
If the touch-screen does not respond correctly to touch
commands, it can be calibrated.
Access the menu Setup > Advanced > Calibrate touch-
screen.
Language
Set date and time
Conditional commands
Reset configuration
B
B
Reset configuration
B
CONFIRM CALIBRATION
YES NO
Thu 05/09/09 - 16:07 0W
Confi rm by pressing the YES icon.
To calibrate the touch-screen, simply press and hold
the cross which appears in 3 different positions for 2
seconds.
Hold down for 2 seconds
SET INPUT
2 different functions can be assigned to the CFP-CFP
input on the bracket terminal board:
• Floor door call (CFP)
• Alarm function (a Simplebus alarm signal is sent to the
switchboard).
Access the menu Setup > Advanced > Set input.
CFP function CFP function
Alarm function
Thu 21/06/12 - 16:07 0W
Select the function by pressing the icon to the right of it.
TOTAL RESET
The function deletes all door entry monitor settings
implemented by the user, restoring the system to its
original default status.
Access the menu Setup > Advanced > Total reset.
Language
Set date and time
Conditional commands
Reset configuration
B
B
Reset configuration
B
Confirm user and system
configuration reset?
YES NO
Thu 05/09/09 - 16:07 0W
Confi rm by pressing the YES icon.