BT 6300 - Manual (Page 48)

48
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
Additional settings
4. The display shows New PIN . Enter your new system PIN,
then select OK .
5. The display shows Confirm . Enter your new system PIN
again, then select OK . The display will show System PIN
Changed . If the PIN was entered incorrectly, New PIN
Does Not Match is displayed and you are taken back to
the beginning.
6. Press to exit.
Restore default settings
1. At the base: Press then press OK to select Set Base .
(This will only restore the base default settings).
Or
At the handset: Press Menu , scroll to Set Base
and press OK . (This will restore both handset and base
default settings).
2. Scroll to Default and select OK .
3. Display shows PIN? Enter the 4 digit PIN (default 0000)
and press OK .
The handset power switches off and the base will beep
then the handset will return to the standby display.
Default Settings
Earpiece volume 3
Handset and base
ringer volume
5
Handset and base
ringer melody
5
PIN code 0000
Handset name H/S1
Handset language English
Keybeeps ON
Auto talk ON
Dial mode Tone
Pause after dialling 3 seconds
6488 BT Freestyle 6300 UG [4] 18/10/04 11:02 am Page 48