Comark N9005 - Manual (Page 4)

3
GENERAL INFORMATION
It is recommended that you read the safety and operation instructions
before using this instrument.
WARNING
TO AVOID ELECTRIC SHOCK DO NOT ALLOW ANY PROBE OR
SENSOR TO COME INTO CONTACT WITH LIVE ELECTRICAL
POWER CONDUCTORS WITH VOLTAGES IN EXCESS OF 30V AC
RMS OR 60V DC.
TO AVOID DAMAGE OR BURNS, DO NOT MAKE TEMPERATURE
MEASUREMENTS IN MICRO-WAVE OVENS.
CAUTION
Temperature Measurement Probes
This precision instrument has been designed for use with the extensive
range of Comark temperature probes. The use of other probes may
impair the performance and accuracy of the instrument. Full details of
Comark probes and sensors can be obtained from Comark Customer
Support department or your local distributor.
This instrument is manufactured in accordance with
the Company’s ISO 9000:2000 Quality Approved
System.
This instrument complies with the Electromagnetic
Compatibility Directive EN 61326-1.
Declarations of Conformity available. Contact
Comark Customer Support or your local Distributor.
In line with its policy of continuous development, Comark Instruments
reserves the right to alter the instrument specification without prior
notice. Further information is available from Comark Instruments or your
distributor.
ISO 9001
FM 29700