Clarus Environmental Centrifugal STEP Systems - Manual (Page 4)

4
© Copyright 2014. All rights reserved.
15 3/8"
24 3/8"
42 5/8"
3 1/2" OF TETHER
LENGTH FROM STRAP
8 3/4" REF.
ALARM FLOAT/PUMP FLOAT
(TETHERED ON OPPOSITE
SIDE OF OTHER)
ALARM FLOAT
PUMP FLOAT
PUMP "ON"
PUMP "OFF"
4"
8"
ALARM "ON"
10"
45 7/8"
LIQUID LEVEL
CODE
18" TYP.
CONSULT LOCAL
EFFLUENT
CLEAR
RELATIVELY
INLET
2" 3" MIN.
TO ALARM
TO POWER SOURCE
2" PVC CONDUIT
SUPPLIED BY OTHERS
QWIK BOX
FILTERED EFFLUENT
PUMP "ON"
PUMP "OFF" 4"
8"
ALARM "ON"
10"
ABOVE GRADE APPLICATION
BELOW GRADE APPLICATION
SK1684
Figure 2 - Elevation View Centrifugal STEP System
Note: All on/off alarm
settings must comply with
all state and local codes.
Note: It is the responsibility
of the installer & designer
to assure all state and local
codes are met.
SK1685
Figure 1B - Typical Installation Centrifugal STEP System - Qwik Box
Note: It is the responsibility
of the installer & designer
to assure all state and local
codes are met.
PUMP "ON"
PUMP "OFF"
18" TYP.
CODE
CONSULT LOCAL
INLET
2"
LIQUID LEVEL
3" MIN.
4"
RELATIVELY
EFFLUENT
CLEAR
8"
FILTERED EFFLUENT
ALARM "ON"
10"
J-BOX
18" MIN.
TO POWER SOURCE AND ALARM
SECURE EXCESS CORDAGE
(FOR FILTER REMOVAL)
SK1686
Note: Some codes require
the junction box to be outside
the riser.
Note: All on/off alarm
settings must comply
with all state and local
codes.
Figure 1A - Typical Installation Centrifugal STEP System - J-Box